Time needed: 5 minutes
Follow from Step 1 to Step 7 in order to create Opnet using Network Simulator projects. Quick guide to create Opnet Network Simulator. Reach us , if you want an customize Opnet simulator projects works for scholars.
- Need Software & Installation
1) OS: Windows 7[ultimatate -x86]
2) Processor:dual core or above
3) Ram :minimum 2GB
4) Riverbed opnet -17.5A
- Download and install Opnet
We can download the Riverbed opnet -17.5A from the following Link
http://www.rishiheerasing.net/modules/can3102/tools.html
- Installation perform the following Steps
1) click on the downloaded file , which is named as, modeler_ae_175A_PL7_13312_win.exe
2) Next,Accept the license condition from the terms window.
3) Next, Click on Next Button from the window.
4) Next, Activate the tool,based on the token. During the installation the token is generated.
multistar dvr default password work - Opnet Tool
Activate the opnet tool,based on the token. During the installation the token is generated. Open the tool to open the installed software.
- Run the project
Open the tool to open the installed software, goto start menu and select the tool name with the installed version
- Open the already completed project
Open the already completed project file , which is already developed and stored in the local drive. The topology construction and process are based on the required algorithm and protocols.
- Run the simulation
To run the simulation , we need to click on the configure/run discrete event simulate button and get the simulation area.
Reboot the DVR, unplug all cameras, and try
If you face any issues on How to Use Opnet Network Simulator, reach us to create an customize Opnet network simulator projects.
Related Links
Reboot the DVR, unplug all cameras, and try logging in directly via monitor. Some firmwares hide the password field until you create a security question. Reboot the DVR
Unlike some brands with a single universal password, Multistar DVRs vary by firmware version and distributor. However,
If the default passwords do not work, use one of these recovery techniques: Disconnect the power cable from the DVR.
Try these combinations for the user, which are frequent across generic DVR brands:
Some non-branded DVRs require opening the case and short-circuiting two specific pins (often labeled "TP" or "RESET") with tweezers while powering on the device. 2. CMOS Battery Method
