Flashing firmware carries a risk. If the power fails during the process, the board may require an external SPI Flash Programmer (like the CH341A) to recover.
The standby LED will typically blink rapidly (red and blue/green). Do not turn off the power during this phase.
sudo nvme fw-download /dev/nvme0 --fw=firmware.bin sudo nvme fw-commit /dev/nvme0 --slot=1 --action=1
Before flashing any firmware, you must ensure the file matches your hardware. Using the wrong version can lead to a black screen or a "dead" board. Check the following:
> SYSTEM ONLINE.