regulates tension by generating a control voltage (0–24V) for magnetic particle clutches/brakes or a torque command voltage (0–5V) for AC servo amplifiers.

on the tension controller side. It is strictly forbidden to share a common ground with strong electrical power systems. Noise Mitigation: Control lines should be laid at least 100mm (3.94") away from main power lines to prevent signal noise. Enclosure Requirements:

Finally, he remembered an old encrypted drive left by the previous lead engineer. He plugged it in, fingers flying across the keyboard. There it was: a PDF titled

— possible interpretations

Use for terminal block connections, tightened to a torque of 0.5 to 0.8 N·m .