Relay (250V/7A) or voltage pulse for SSR (Solid State Relay). Power Supply: AC 85–242V or standard 110V/220V options. 🕹️ Operation & Basic Setup
Relay (AC 220V 5A), Voltage pulse (for SSR), or 4–20mA current. DV Electrical Products 2. Basic Operation & Settings Setting the Target Temperature (SV): key briefly; the SV display will begin to flash. is less than logical and logical or (Down) keys to adjust to your desired temperature. again to save and return to the normal display. Accessing Parameter Menus: Long-press the xmtk-9000 user manual
A: Contact technical support with your unit's serial number (found on the rear label). There is no hardware backdoor for security reasons. Relay (250V/7A) or voltage pulse for SSR (Solid State Relay)
The XMTK-9000 is a compact, multi-function toolkit (assumed: electronic test & measurement device with oscilloscope, multimeter, signal generator, and power supply). This guide gives setup, basic operation, common tasks, maintenance, safety, troubleshooting, and specifications — assuming typical features for this class of device. DV Electrical Products 2
Every must include a troubleshooting matrix. The XMTK-9000 provides four independent alarm outputs (AL1, AL2, AL3, AL4).
to enter the configuration menu. You can then toggle through parameter codes (1–24) to adjust internal logic like PID constants. Unlocking Settings: If you cannot change values, check parameter 22 ( ). Set it to to unlock all operations. Auto-Tuning:
Use the (shift), ∧ (up), and ∨ (down) keys to adjust the value to your desired temperature. Press SET again to save and return to normal operation. Accessing Parameter Settings: