: Because it is used in the SLS process, the surrounding unsintered powder acts as a natural support. This allows you to print intricate geometries, openwork, and interlocking parts without the need for manual support structures. Dimensional Stability : It offers tight tolerances of approximately
Are you looking to use 3301PA Nylon for a , or AI responses may include mistakes. Learn more 3301pa nylon
| Property | PA12 (Standard) | PA11 (Bio-based) | | | :--- | :--- | :--- | :--- | | Flexural Modulus | ~1,200 MPa | ~1,100 MPa | ~1,500–1,700 MPa | | Elongation at Break | ~20% | ~30% | ~25–35% | | Heat Deflection Temp (HDT @ 0.45 MPa) | ~150°C | ~140°C | ~165–175°C | | Moisture Absorption | Low | Moderate | Low to Moderate | | Price Point | Medium | High | Cost-effective | : Because it is used in the SLS
| Property | Value | Comparison | | :--- | :--- | :--- | | Tensile Strength | 68 ± 5 MPa | Similar to ABS, but with higher ductility | | Young’s Modulus | 2100 – 2500 MPa | Stiffer than standard PA6 | | Elongation at Break | 45% – 60% | Excellent for snap-fits and living hinges | | Izod Impact Strength (notched) | 55 – 70 J/m | 3x higher than ABS | | Flexural Strength | 85 MPa | Ideal for structural brackets | Learn more | Property | PA12 (Standard) |
is a high-performance, internally lubricated nylon (polyamide) thermoplastic, typically based on Nylon 6/6 . It is widely recognized in the plastics industry as a premium bearing and wear-resistant material.