This report details the integration of the MLX90614 Infrared (IR) Thermometer into Proteus for circuit simulation. Since the MLX90614 is not a built-in component in standard Proteus libraries, it requires custom library files and an I2C-compatible microcontroller (like Arduino) for operation. 1. Component Overview: MLX90614 The MLX90614 is a non-contact IR sensor used for remote temperature measurement. Measurement Range: Typically -70∘Cnegative 70 raised to the composed with power C +380∘Cpositive 380 raised to the composed with power C for object temperature and -40∘Cnegative 40 raised to the composed with power C +125∘Cpositive 125 raised to the composed with power C for ambient temperature. Accuracy: Approximately ±0.5∘Cplus or minus 0.5 raised to the composed with power C at room temperature. Communication: Uses the SMBus (I2C) protocol for digital data output. Pinout: VCC: Power (3.3V or 5V depending on model). GND: Ground. SCL: Serial Clock for I2C communication. SDA: Serial Data for I2C communication. 2. Proteus Library Installation Because Proteus does not include the MLX90614 by default, you must download a third-party library (often provided by sites like The Engineering Projects or GitHub ). Installation Steps: Download: Obtain the .LIB and .IDX files for the MLX90614. Locate Library Folder: Go to your Proteus installation directory (e.g., C:\ProgramData\Labcenter Electronics\Proteus 8 Professional\LIBRARY ). Paste Files: Copy and paste the downloaded files into this folder. Restart Proteus: Restart the software to refresh the component list. 3. Firmware Integration (Arduino) To read the sensor values in simulation, you need an Arduino library to handle the I2C communication. Testing MLX90614 and setting up it with other I2C sensors
MLX90614 Infrared Thermometer Library for Proteus The MLX90614 is a non-contact infrared thermometer that can measure temperature in a wide range of applications. In this write-up, we will explore how to use the MLX90614 library in Proteus, a popular simulation software for electronic circuits. Introduction The MLX90614 is a high-accuracy infrared thermometer that uses advanced thermopile technology to measure temperature. It has a wide temperature measurement range of -40°C to 125°C and an accuracy of ±0.5°C. The device communicates with microcontrollers using the I2C protocol. Proteus Library To use the MLX90614 in Proteus, you need to download and install the MLX90614 library. The library provides a virtual model of the device that can be used in your Proteus simulations. Step-by-Step Installation
Download the MLX90614 library from the official website or a trusted source. Extract the zip file to a folder on your computer. Open Proteus and navigate to the "Library" folder. Copy the extracted library files into the Proteus library folder. Restart Proteus to load the new library.
Adding the MLX90614 to Your Proteus Schematic mlx90614 proteus library
Open Proteus and create a new project. Click on "Place" > "Device" and search for "MLX90614". Select the MLX90614 device from the search results and click "OK". The MLX90614 device will be added to your schematic.
Configuring the MLX90614
Double-click on the MLX90614 device to open its properties window. Configure the device settings as required, such as the I2C address and temperature measurement range. This report details the integration of the MLX90614
Simulation and Testing
Connect the MLX90614 to your microcontroller or other devices in your Proteus schematic. Run the simulation and test the MLX90614 device to ensure it is working correctly.
Example Code Here is an example code snippet in C that demonstrates how to read temperature data from the MLX90614 using the I2C protocol: #include <stdint.h> #include <stdbool.h> #include <avr/io.h> #include <avr/interrupt.h> Component Overview: MLX90614 The MLX90614 is a non-contact
#define MLX90614_I2C_ADDRESS 0x5A
void mlx90614_init() { // Initialize I2C communication TWBR = 0x18; // 100 kHz TWSR = 0x00; }
.png)
.png)
1.png)