Unlike devices with USB bootloaders, the LCR-T7 typically requires an .

This is a known issue with some m-firmware builds. Edit config.h to adjust RELAY_OFF_DELAY to 60 seconds instead of 10.

The stock firmware provides a user-friendly color interface that automatically identifies a wide range of components:

Remove the three screws on the back. Gently separate the case. Locate the (usually labeled “MOSI, MISO, SCK, RESET, VCC, GND”).

git clone https://github.com/madias/AVR-Transistortester.git cd AVR-Transistortester/Software/trunk

Updating the firmware on an Go to product viewer dialog for this item.